search

PIIIM-275 DS, Hakel PIIIM-275 DS, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

0 ₫
Thuế

PIIIM-275 DS, Hakel PIIIM-275 DS, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

Số lượng

PIIIM-275 DS, Hakel PIIIM-275 DS, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

 

 
PIIIM-275 DS

PIIIM-275 DS

PIIIM-275 DS Vseries is a single-pole, metal oxid varistor surge arrester Type 2 according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building. The main use of PIIIM-275 Vseries arrester is in all kinds of industry, residential and administration buildings. They are to be placed into the subsidiary switchboards or control boxes.

The marking M specifies a type of construction with removable module. The marking of DS specifies a version with remote monitoring.

Internal wiring diagram
Internal wiring diagram
Dimension drawing
Dimension drawing
Installation diagram
Installation diagram
PARAMETERS
Test class according to EN 61643-11 ed. 2 and IEC 61643-11   TYP 2, CLASS II
Maximum continuous operating voltage UC 275 V AC / 350 V DC
Maximum discharge current Imax 50 kA
Nominal discharge current for class II test (8/20) In 20 kA
Voltage protection level Up < 1,3 kV
Temporary overvoltage (TOV) UT 335 V/5 s
Response time tA < 25 ns
Max. back-up fuse   160 A gL/gG
Short-circuit withstand capability 160 A gL/gG ISCCR 60 kArms
LPZ   1-2
Housing material   Polyamid PA6, UL94 V-0
Degree of protection of enclosure   IP20
Operating temperature   -40°C ... +80 °C
Cross-section of the connected conductors (at tightening moment of clamps 3 Nm)   25 mm2 (solid)
16 mm2 (wire)
Method of assembly   DIN rail 35 mm
Failure signalisation (S)   green - ok / red - failure
Potential free signal contact (DS) (recommended cross-section of remote monitoring max.1 mm2)   AC: 250 V / 0,5 A, DC: 250 V / 0,1 A
Lifetime   min.100 000 h
Weight m 90 g
Article number   27 005
 
CERTIFICATIONS
DOWNLOADS
Catalogue
 

Tham Chiếu Cụ Thể