search

PIIIM-275/1+1, Hakel PIIIM-275/1+1, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

0 ₫
Thuế

PIIIM-275/1+1, Hakel PIIIM-275/1+1, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

Số lượng

PIIIM-275/1+1, Hakel PIIIM-275/1+1, chống sét lan truyền, thiết bị chống sét lan truyền nguồn điện 1 pha cấp 2 Hakel, chống sét

 

 
PIIIM-275/1+1

PIIIM-275/1+1

PIIIM-275/1+1 Vseries is a two-pole, metal oxid varistor surge arrester combined with gas discharge tube, Type 2 according to EN 61643-11 and IEC 61643-11. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building. The main use of PIIIM-275/1+1 Vseries arrester is in all kinds of industry,residential and administration buildings. They are to be placed into the subsidiary switchboards or control boxes.

The marking M specifies a type of construction with removable module. The marking of DS specifies a version with remote monitoring.

Internal wiring diagram
Internal wiring diagram
Dimension drawing
Dimension drawing
Installation diagram
Installation diagram
PARAMETERS
Test class according to EN 61643-11 ed. 2 and IEC 61643-11   TYP 2, CLASS II
Network type   TT
TN-S
Maximum continuous operating voltage UC 275 V AC / 350 V DC
Maximum discharge current Imax 50 kA
Nominal discharge current for class II test (8/20) In 20 kA
Total discharge current (8/20 µs) L+N->PE Itotal 50 kA
Voltage protection level Up < 1,3 kV
Impulse discharge current for class I test (10/350) N/PE Iimp 20 kA
Temporary overvoltage (TOV) L/N UT 335 V/5 s
Temporary overvoltage (TOV) N/PE UT 1200 V/0,2 s
Response time L/N tA < 25 ns
Response time N/PE tA < 100 ns
Max. back-up fuse   160 A gL/gG
Short-circuit withstand capability 160 A gL/gG ISCCR 60 kArms
LPZ   1-2
Housing material   Polyamid PA6, UL94 V-0
Degree of protection of enclosure   IP20
Operating temperature   -40°C ... +80 °C
Cross-section of the connected conductors (at tightening moment of clamps 3 Nm)   25 mm2 (solid)
16 mm2 (wire)
Method of assembly   DIN rail 35 mm
Failure signalisation (S)   green - ok / red - failure
Lifetime   min. 100 000 h
Weight m 166 g
Article number   27 014
 
CERTIFICATIONS
DOWNLOADS
Catalogue

Tham Chiếu Cụ Thể