DG M TN 150, DG M TN 150 952 201, 952 201, 952201, chống sét nguồn điện 1 pha mạng TN 150V, chống sét lan truyền, DEHN, Hahitech

Sản phẩm mới

DG M TN 150, DG M TN 150 952 201, 952 201, 952201, chống sét nguồn điện 1 pha mạng TN 150V, chống sét lan truyền, DEHN, Hahitech

DG M TN 150, DG M TN 150 952 201, 952 201, 952201, chống sét nguồn điện 1 pha mạng TN 150V, chống sét lan truyền, DEHN, Hahitech


 

Download tài liệu DG M TN 150

Download tài liệu hướng dẫn lắp đặt DG M TN 150

Download tài liệu thiết bị chống sét DEHN

 

 

 

DEHNguard M TN 150 surge arrester
Modular and pluggable two-pole surge arrester
for single-phase TN-S systems, width: 2 modules
Type 2 SPD according to EN 61643-11
Max. continuous operating voltage: 150 V a.c.
Voltage protection level: <= 0.7 kV
Nominal discharge current: 15 kA
Short circuit strength: 50 kArms
Energy-coordinated according to IEC 62305-4
with arresters of the Red/Line series
Fault indication

delivery and installation.

Brand: DEHN + SÖHNE
Type: DG M TN 150
Part No.: 952 201

or equivalent.


 

Type

DG M TN 150

Part No.

952 201

SPD according to EN 61643-11 / IEC 61643-11

type 2 / class II

Nominal voltage (a.c.) (UN)

120 V (50 / 60 Hz)

Max. continuous operating voltage (a.c.) (UC)

150 V (50 / 60 Hz)

Nominal discharge current (8/20 µs) (In)

15 kA

Max. discharge current (8/20 µs) (Imax)

40 kA

Voltage protection level [L-PE]/[N-PE] (UP)

≤ 0.7 / ≤ 0.7 kV

Voltage protection level [L-PE] / [N-PE] at 5 kA (UP)

≤ 0.55 / ≤ 0.55 kV

Response time (tA)

≤ 25 ns

Max. mains-side overcurrent protection

125 A gG

Short-circuit withstand capability for max. mains-side overcurrent protection (ISCCR)

50 kArms

Temporary overvoltage (TOV) (UT) – Characteristic

175 V / 5 sec. – withstand

Temporary overvoltage (TOV) (UT) – Characteristic

230 V / 120 min. – safe failure

Operating temperature range (TU)

-40 °C ... +80 °C

Operating state / fault indication

green / red

Number of ports

1

Cross-sectional area (min.)

1.5 mmsolid / flexible

Cross-sectional area (max.)

35 mmstranded / 25 mmflexible

For mounting on

35 mm DIN rails acc. to EN 60715

Enclosure material

thermoplastic, red, UL 94 V-0

Place of installation

indoor installation

Degree of protection

IP 20

Capacity

2 module(s), DIN 43880

Approvals

KEMA, UL

Weight

211 g

GTIN

4013364123915

PU

1 pc(s)

Part No.

952 201


RelatedProducts